Drew Price
10-09-2013, 08:33 PM
Sorry for the poor photos, it was dark in my shop last night.
If you want more detail or measurements of anything just ask.
These all came off old cars that were getting scrapped out, most parts are in unknown condition and priced accordingly. Hopefully some of this can go to use for rookie teams, or to use for training, or just be cool book ends or something. I intended to build a frame and re-use some of this stuff, but I won't get to it any time soon and would rather see it go to use.
Buyer pays shipping, I will ship internationally after receiving payment and you pay all taxes and duty fees, but would prefer to sell domestic if possible.
Buyer can pick parts up in the Los Angeles area if desired.
Feel free to make reasonable offers, and I will work on price if you buy multiple things.
-SOLD Pair of Wilwood master cylinders and balance bar with brake pedal, condition unknown but they do still have fluid in them, worst case they would need rebuild kits. Both cylinders are 0.75" bore. The cylinders are $53/ea new - asking $75 for the whole thing.
-Two LED 12v brake lights, one momentary push button switch. $5/ea or 1 free if you buy something else
-Mystery rockers, might be useful for mockup or to scavenge the bearings or something - $make offer
-Pair of Stratos Helix X-Pert dampers, rebound adjust with 250 lb/in springs. I forgot to get the C-C measurement but they are pretty small, already have bronze bushes installed I believe for 1/4" bolts. $make offer
-2 halfshafts, all of the tripods are missing at least one bearing, and one tulip stup splined to fit a Torsen - Don't know how to ID these, can measure length and spline count if interested. $make offer
-SOLD Set of uprights - 4 make a set that came off one car plus one oddball one, REIB mounting on the fronts, all have rotors, hubs with studs (4x100) and bearings, 2 have Wilwood PS-1 calipers and one has a CNC caliper, don't know bore sizes but I will measure if interested. I will break them down if interested, you could re-use the live spindles and hubs. $make offer
-SOLD Home made aluminum accelerator pedal with adjustable hard stop - $25
-SOLD Torsen diff (CONDITION UNKNOWN) with custom aluminum outer housing, inboard brake rotor with CNC caliper, sprocket, pivot tensioning with turnbuckles, homemade rear anti-roll bar with blade end links. $200 - I can break it down so shipping is cheaper, it's still mounted in the rear box off the donor car
-Grab bag of threaded rod ends (some are a little rusty, should be fine for non-critical stuff like suspension), chain, two coils (they'll be for R6 or CBR600, I can check which if interested), mystery TPS, line pressure brake light switch with fittings - $2/ea for rod ends, $10/chain, $10/brake light switch
-SOLD-Small CO2 tank with regulator, Ingersoll-Rand solenoid valves and double-acting Clippard cylinder - $make offer
-SOLDSet of 13" wheels, 4x100, forgot to measure the offset, with used but good tread remaining Hoosier wets. I believe that all hold air fine. $250/offer
-2 stock R6 exhaust header assemblies, could be a good start to a set of custom headers - $make offer
-Chunk of AL honeycomb, was the impact attenuator for a 2009 or 2010 car, I can measure if interested - $make offer
https://lh4.googleusercontent.com/-7nES7i9n1Jw/UlWj43ynyMI/AAAAAAAANQA/8BoP3vMSBd8/s720/FSAE_parts_for_sale%2520%25282%2529.JPG
https://lh3.googleusercontent.com/-vvyUVkRWB30/UlWj5fLoG-I/AAAAAAAANQI/PgV3GTO_VBc/s720/FSAE_parts_for_sale%2520%25283%2529.JPG
https://lh5.googleusercontent.com/-BKEoabATR4E/UlWj6uGJtMI/AAAAAAAANQY/1-Pn1R0vNHU/s720/FSAE_parts_for_sale%2520%25285%2529.JPG
https://lh3.googleusercontent.com/-3ASOzz74wBw/UlWj8Q4cj6I/AAAAAAAANQ4/fHoAq5246j4/s720/FSAE_parts_for_sale%2520%25289%2529.JPG
If you want more detail or measurements of anything just ask.
These all came off old cars that were getting scrapped out, most parts are in unknown condition and priced accordingly. Hopefully some of this can go to use for rookie teams, or to use for training, or just be cool book ends or something. I intended to build a frame and re-use some of this stuff, but I won't get to it any time soon and would rather see it go to use.
Buyer pays shipping, I will ship internationally after receiving payment and you pay all taxes and duty fees, but would prefer to sell domestic if possible.
Buyer can pick parts up in the Los Angeles area if desired.
Feel free to make reasonable offers, and I will work on price if you buy multiple things.
-SOLD Pair of Wilwood master cylinders and balance bar with brake pedal, condition unknown but they do still have fluid in them, worst case they would need rebuild kits. Both cylinders are 0.75" bore. The cylinders are $53/ea new - asking $75 for the whole thing.
-Two LED 12v brake lights, one momentary push button switch. $5/ea or 1 free if you buy something else
-Mystery rockers, might be useful for mockup or to scavenge the bearings or something - $make offer
-Pair of Stratos Helix X-Pert dampers, rebound adjust with 250 lb/in springs. I forgot to get the C-C measurement but they are pretty small, already have bronze bushes installed I believe for 1/4" bolts. $make offer
-2 halfshafts, all of the tripods are missing at least one bearing, and one tulip stup splined to fit a Torsen - Don't know how to ID these, can measure length and spline count if interested. $make offer
-SOLD Set of uprights - 4 make a set that came off one car plus one oddball one, REIB mounting on the fronts, all have rotors, hubs with studs (4x100) and bearings, 2 have Wilwood PS-1 calipers and one has a CNC caliper, don't know bore sizes but I will measure if interested. I will break them down if interested, you could re-use the live spindles and hubs. $make offer
-SOLD Home made aluminum accelerator pedal with adjustable hard stop - $25
-SOLD Torsen diff (CONDITION UNKNOWN) with custom aluminum outer housing, inboard brake rotor with CNC caliper, sprocket, pivot tensioning with turnbuckles, homemade rear anti-roll bar with blade end links. $200 - I can break it down so shipping is cheaper, it's still mounted in the rear box off the donor car
-Grab bag of threaded rod ends (some are a little rusty, should be fine for non-critical stuff like suspension), chain, two coils (they'll be for R6 or CBR600, I can check which if interested), mystery TPS, line pressure brake light switch with fittings - $2/ea for rod ends, $10/chain, $10/brake light switch
-SOLD-Small CO2 tank with regulator, Ingersoll-Rand solenoid valves and double-acting Clippard cylinder - $make offer
-SOLDSet of 13" wheels, 4x100, forgot to measure the offset, with used but good tread remaining Hoosier wets. I believe that all hold air fine. $250/offer
-2 stock R6 exhaust header assemblies, could be a good start to a set of custom headers - $make offer
-Chunk of AL honeycomb, was the impact attenuator for a 2009 or 2010 car, I can measure if interested - $make offer
https://lh4.googleusercontent.com/-7nES7i9n1Jw/UlWj43ynyMI/AAAAAAAANQA/8BoP3vMSBd8/s720/FSAE_parts_for_sale%2520%25282%2529.JPG
https://lh3.googleusercontent.com/-vvyUVkRWB30/UlWj5fLoG-I/AAAAAAAANQI/PgV3GTO_VBc/s720/FSAE_parts_for_sale%2520%25283%2529.JPG
https://lh5.googleusercontent.com/-BKEoabATR4E/UlWj6uGJtMI/AAAAAAAANQY/1-Pn1R0vNHU/s720/FSAE_parts_for_sale%2520%25285%2529.JPG
https://lh3.googleusercontent.com/-3ASOzz74wBw/UlWj8Q4cj6I/AAAAAAAANQ4/fHoAq5246j4/s720/FSAE_parts_for_sale%2520%25289%2529.JPG