View Full Version : dimensioning parts
Fred the Gypsy
01-03-2005, 05:54 PM
Hey guys I found this really neato way to quickly dimension parts.
Check this out, I am a genius.
The world will follow my lead.
If only I had a monitor big enough to tape the motor to....http://www.surfsouth.com/~zedrick/cody_cad.jpg
Fred the Gypsy
01-03-2005, 05:54 PM
Hey guys I found this really neato way to quickly dimension parts.
Check this out, I am a genius.
The world will follow my lead.
If only I had a monitor big enough to tape the motor to....http://www.surfsouth.com/~zedrick/cody_cad.jpg
drivetrainUW-Platt
01-03-2005, 08:14 PM
intersting, work on adding a third axis to the system!
http://fsae.com/groupee_common/emoticons/icon_smile.giffinally i have a way to get the motor drawn up thanks
drivetrainUW-Platt
01-12-2005, 07:52 PM
check out Denny's link in the Ohlins Shock Thread, if you get enough digital calipers on a part that could also work for a dimensioned drawing!
Powered by vBulletin® Version 4.1.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.