Keizer wheel dimension

[Lim]

Anyone out there has the wheel contour/profile for the Keizer 13x6 wheels? Been trying to find out the offset available using the 0.19" ally centre and the space within to package the uprights.

Thanks.

[Lim]

Anyone out there has the wheel contour/profile for the Keizer 13x6 wheels? Been trying to find out the offset available using the 0.19" ally centre and the space within to package the uprights.

Thanks.

[Sam Zimmerman]

Call Keizer at 712-737-3053.

They can help you.

[Brent Howard]

They should be able to help you out with that no problem. I think there are a few options in the offest that you can choose in 1" increments. However, be very careful with the info Keizer gives you. We had quite a few problems with the Keizer centers in the past few years. They gave us the spline data, and when we recieved the centers it was wrong. Our machinist couldn't believe the difference in the spline they said it was and the spline that actually arrived. We also have still not been able to find the perfect profile for the area where our single wheel nut contacts the wheel centers.

Brent

[Lim]

Thanks for the help guys. Called Keizer yesterday and managed to get to them this time round, but I'm still waitng for the CAD or DWG.

We're thinking of machining our own centre piece, given that some teams have done it and found it more cost effective. We're toying wiht a 3-lug design using M8.

Any comments?