Shared CAD Files Library for FSAE

[James Waltman]

The FSAE team at Western Washington University (http://dot.etec.wwu.edu/fsae/) has agreed to host a CAD file library for everyone. This will be a central place for teams to share common CAD files.

I'll be helping to manage this. Contact me if you have any files that you would like to contribute (email in my profile).

Right now there's a basic structure set up and I expect that it will stay this way (pretty bare bones).

You should be able to find it here:
<STRIKE>http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/</STRIKE>

New location - Dec 29th 07:
http://www.wwufsae.com/Shared_FSAE_CAD_Library/


There isn't much there yet. I'll make this thread a sticky for a while and see if it helps to build up the library. Feedback will determine how long it stays a sticky.
The creator of the model and their contact information will be included whenever possible. Don't send any files that didn't come from you or your team unless you have permission from the creator of the file.

I don't want to hear anything about how sharing CAD files robs people of some sort of learning.


Edit was to update link for new location.

[Nima]

I offer you to start a database-based downloading center (i.e. mysql-php) to let the visitors search the contents and downloads. In this way it will remain for the years with a powerful file library. I can help you to setup such website.
persianstop@yahoo.com

[absolutepressure]

Well, this isn't mine, so I won't send it to you, but I will post the link to it. I can't remember if we are using the higher level assembly or not. I believe one of them has modified parts, like the oiling system, so be careful which one you use.

'03 Yamaha R6 solid model (http://www.spreadsheet-cad.com/index.php?ind=downloads&op=section_view&idev=8)

James, I think this is a great idea.

[Mechanicaldan]

Hi all! I was working on the same thing. I started setting up a google group and have loaded some files. They're Solidworks parts.

http://groups-beta.google.com/group/FSAEnetwork

[James Waltman]

Nima,
Thanks for the offer. I don't really know anything about MySQL so I don't understand how it would improve this. I have access to the server to add and remove files but not access to do much else. I don't expect that there will be thousands of files to search through or keep track of.

This was always something that I thought would be helpful but never got around to doing. I thought that the shared gmail account (http://fsae.com/eve/forums/a/tpc/f/125607348/m/20610992731) that Matt Gignac set up would be the solution. It didn't quite work (http://fsae.com/eve/forums/a/tpc/f/125607348/m/50010038731) so I've decided to go this way. I think that this will be a pretty stable way to do it.

Dan,
I thought about using Google Groups too. I'm a big fan and the owner of a few groups.
The new Files (http://groups-beta.google.com/support/bin/answer.py?answer=46764&topic=9251) feature is nice but the current limit is 100MB per group. I don't think that is nearly enough.

[Nima]

OK, ask your web server admin to give you a mysql account in that server. it is enough to setup a powerful download center. If you want to test what am I saying, get the mysql account then I will do what ever must be done, just for testing and if you accept the work I will complete it without any money.
else I don't insist any more.

[Scannee]

Are some of the files in the google site locked? ive downloaded the engine and wheels models and they wont unzip

Thanks

Steve

[Mechanicaldan]

I zipped them with WinZip 9. You can get the old version of the software here: http://www.oldversion.com/download.php?idlong=10ea7aa83461dc7eaf38ab5352db1d 67

Is anyone else having the same problem? I downloaded the file and it opened fine.

[mtg]

Originally posted by James Waltman:
I don't want to hear anything about how sharing CAD files robs people of some sort of learning.

And this is coming from a guy who refuses to use Solid Edge at work http://fsae.com/groupee_common/emoticons/icon_smile.gif

[skillet]

well i suppose it depends on how thorough your CAD training is within your curriculum but for team members that can barely draw a cube giving them a part to model helps them become more familiar with the software and will help increase their productivity as they learn to use features that improve efficiency.

[Pedrot16]

Great!!Thanks

[MacV]

I have a model of the 2006 Honda CBR600RR. Where should I put it?

Mac

[James Waltman]

Send me an email and we'll work it out.
My address is in my profile.

Thanks Mac.

[Matador Motorsports]

Well, this isn't mine, so I won't send it to you, but I will post the link to it. I can't remember if we are using the higher level assembly or not. I believe one of them has modified parts, like the oiling system, so be careful which one you use.

'03 Yamaha R6 solid model

James, I think this is a great idea.
Hey Guys...
Just wanted to say that this model actually belongs to California State University, Northridge. Some of our alumni actually went and got most of the components CMM. As far as the accuracy, we've found lots of problems and it actually was the fault of our engine mounts being about 1 inch off. Be wise if using this model. Being able to modify it to make the corrections is pretty complicated as well. Oh and this is actually a 2001 engine that was modeled, not a 2003 like it says. The transmission internals were from a 2003, and I think that's where the confusion came from.

I think this database is a great idea.

[Rob Littlewood]

MacV,

We are desperately in need of the CBR RR model. I can't see it on the shared drive yet. Can you email it to me at Rob_Littlewood@hotmail.com or tell me where to get it from the drive James?

Cheers
Rob

[James Waltman]

Rob, there isn't an RR model up there yet. I haven't gotten anything from Mac yet.

Ricardo, I tried to get a hold of Chris (who originally posted that model). I haven't had any luck yet.
Do you mind if I put it up to share (errors and all)?

[absolutepressure]

Originally posted by Matador Motorsports:
Hey Guys...
Just wanted to say that this model actually belongs to California State University, Northridge. Some of our alumni actually went and got most of the components CMM. As far as the accuracy, we've found lots of problems and it actually was the fault of our engine mounts being about 1 inch off. Be wise if using this model. Being able to modify it to make the corrections is pretty complicated as well. Oh and this is actually a 2001 engine that was modeled, not a 2003 like it says. The transmission internals were from a 2003, and I think that's where the confusion came from.

I think this database is a great idea.

Oh...that's very interesting. Thanks for letting us know. So, if we were to model a frame off of the mounting points in the solid model, would it be wrong? Is the block different for a 2003?

[Anday]

Unfortunately we found out that the "Yamaha 03 R6" model is not as accurate as we were led to believe. As it turns out, the crankcase is actually a half inch shorter, while the engine mounts are accurate.

[julio93]

James, I don't think you will be able to get a hold of Chris. He is very hard to get a hold of.

Absolutepressure, the mounting points on the 2001 and 2003 Yamaha R6 are not the same. Like Ricardo said, the model looks good by it has its bugs.

[Horace]

Hello MacV,

Our team could really use the CBR engine model. Could you email it to me at horacelai@gmail.com? It would help a lot thank you so much!

[civicsit]

Hey guys,

Does anyone have a wr450 model? I'm doing some research for our team for my project next year and could really use one. Just e-mail it to civicsit@yahoo.com.

Thanks

[Pedrot16]

does anybody have a rough gsx-r model with mountings ok?

Thanks

[method55]

Keizer 13in model is corrupt.

[Composites Guy]

Horace and Rob Littlewood... see pm

[James Waltman]

The corrupted Keizer zip file should be fixed.
Let me know if there are any problems.

[fecoviruz]

Hello,

We really need your help here. Our team could really use the CBR600 f4i engine model. If you are so kind to help us, please email it to me at fecoviruz@yahoo.com.

Maybe Horace have few CAD models that he received previously.Could you send it to me.

Thanks a lot guys. I really appreciate it.

[crazy_racer]

Hello,

Can anybody share the 2006 SAE Handbook and/or 2006 SAE Standards Ground Vehicle CDs? Our team can't find it anywhere, and we need them to keep our project in compliance with the official rules. We don't want to leech it anywhere, we need it just for personal use. Even if the 2005 Standards are available, we will also be very obliged. If someone can help us, please send a mail to angry_racer@yahoo.com.

Save Our Souls,

(Going) Crazy Racer,
England.

[KIMIKO]

Hey guys,

Does anyone have a CBR 600 f engine model? I'm doing my final project and could really use one

Please email it to me if possible at masterkimiko@gmail.com or tell me where to get it.


Thanks

Powertrain Team
www.formulaestg.tk (http://www.formulaestg.tk)

[Reactive]

We also need a cbr 600 f model urgently, first year team here. All the links i found in these forums are dead. I would really appricate it if you can mail it to me at hckoman@gmail.com



Originally posted by KIMIKO:
Hey guys,

Does anyone have a CBR 600 f engine model? I'm doing my final project and could really use one

Please email it to me if possible at masterkimiko@gmail.com or tell me where to get it.


Thanks

Powertrain Team
www.formulaestg.tk (http://www.formulaestg.tk)

[to the edge]

Hey guys,

I was wondering if anyone has a CAD model of a 2006 R6 engine?

Also have any other teams laser scanned there components becaue we were talking to one of our sponsors about this, and they said it only gives you thousands of points, is that true?

[wrcarter]

Hey,

I was wondering if anyone has a cad model of a Honda CBR 600 F4i engine that they would be willing to share. We are a first year team and it would be a great help. If so could you email it to 0535087@student.ul.ie. Thanks

[Hammock]

Just emailed out an F4I model.

[James Waltman]

Thanks for the model Hammock.

It's been uploaded to the Library.

[method55]

I have a 13 x 7 2d DXF of Magnesium Keizer Centers and Barrel. Let me know if you would like it.

Best,

Eric

[Dave_Dal]

Hey Pedrot16,

I have a 1998 GSX-R modeled in UG NX4. Mounting points are about as close as they can be measured. Let me know if you want it.

[Huskamp]

Mac,
Can I get a copy of the 2006 CBR Motor? What file format is it?

Cheers,
Chris


Originally posted by MacV:
I have a model of the 2006 Honda CBR600RR. Where should I put it?

Mac

[Destruction]

May we please have a copy of the Honda CBR600RR engine ?

Thanks in advance

dori_200sx@hotmail.com

[James Waltman]

I just uploaded a really great CBR600RR model.
<STRIKE>http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/En...CBR600RR_from_OU.zip (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/CBR600RR_from_OU.zip)</STRIKE>

New Location for files:
http://www.wwufsae.com/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/

Thanks to Superfast Matt McCoy and the University of Oklahoma for this.
http://dot.etec.wwu.edu/fsae/HostedPics/James/600rr_1.JPG



Edit was to update location of files.

[ad]

Originally posted by James Waltman:
I just uploaded a really great CBR600RR model.
http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/En...CBR600RR_from_OU.zip (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/CBR600RR_from_OU.zip)

Thanks to Superfast Matt McCoy and the University of Oklahoma for this.
http://dot.etec.wwu.edu/fsae/HostedPics/James/600rr_1.JPG

Awesome! Alot of people will enjoy this. Very generous of OU!

[Mathias]

Does anyone has got some CAD-models from brembo or AP calipers?

[James Waltman]

I added a Brembo caliper model (Brembo_20.6950.10).
Thanks to Dan Barcroft for this one.
<STRIKE>http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Brakes/Calipers/Brembo/</STRIKE>

New location:
http://www.wwufsae.com/Shared_FSAE_CAD_Library/

The file is in SolidWorks. If anyone will convert it to generic formats and email them to me, I'll update the .zip file
I prefer .igs or .stp personally but I'll add anything.


Edit to update file location

[murpia]

Anyone know of a tool that can convert files saved in a newer version of SolidWorks back to a 2003 format file?

Thanks, Ian

[James Waltman]

I added a BBS 13x8 Centerlock model.
Thanks to rwolcott23 for this one.

<STRIKE>http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Wh...and_13x8_Centerlock/ (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Wheels_and_Tires/BBS_13x6_and_13x8_Centerlock/)</STRIKE>

New location:
http://www.wwufsae.com/Shared_FSAE_CAD_Library/


Edit to update file location.

[EgoSprint]

Hello every body from Spain!

We are working here to study the possibilities to build an FSAE car.

We are searchin a Yamaha R6 engine model (new or old), but after searching on http://www.spreadsheet-cad.com/index.php they didn't register us... webmaster seems to be out of order...

So, can any of you help us sending an r6 engine model? (IGES, parasolid, Pro/E...)

Regards!

[t21jj]

My team is looking into switching to the Yamaha WR450 single and if anybody would be willing to share a SolidWorks model I would be really grateful. Feel free to email me at t21jj at yahoo.com

[Ehrin]

My team is looking for a solid works model of the Honda clutch pack differential from the TRX400FW HM7 or the TRX450S HN0 (they should be the same. It would be much appriciated.

[duckei]

I like the Brembo PDF. http://fsae.com/groupee_common/emoticons/icon_smile.gif

[gul]

i am not able to open the cbr model (which is in igs format) in solidworks does any one has the model in any other format or tell me how to open the model

[Go Hawks]

Does anyone have a CAD file for the Suzuki 450 quad motor?

Thanks a lot

[lokuputha]

Originally posted by James Waltman:
I just uploaded a really great CBR600RR model.
http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/En...CBR600RR_from_OU.zip (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/CBR600RR_from_OU.zip)

Thanks to Superfast Matt McCoy and the University of Oklahoma for this.
http://dot.etec.wwu.edu/fsae/HostedPics/James/600rr_1.JPG

Thanks a million!...hopefully now we can finalize our frame.

[Jonny_B]

Hi all,

I'm in real need of a CAD model of a Yamaha R6 engine. I can't get the model that was posted earlier because the admins on the site seem to have disappeared - my registration isn't getting validated.

So if anyone has got an R6 model (any year will do), and are willing to send it to me, it would help so much.

Thanks,

Jon.

[chenyu]

Great!thanks so much!

[skyliner34gtr]

Originally posted by Jonny_B:
Hi all,

I'm in real need of a CAD model of a Yamaha R6 engine. I can't get the model that was posted earlier because the admins on the site seem to have disappeared - my registration isn't getting validated.

we also need the CAD model for Yamaha R6, any1 can help us out?

cheers

So if anyone has got an R6 model (any year will do), and are willing to send it to me, it would help so much.

Thanks,

Jon.

[Anvit Garg]

hey does
http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/

work for you guys? The university's website loads up to the point where I visit the FSAE section.

Has the archive been removed?

[James Waltman]

The server has been down for a few days.
I'm not sure why it's down but one of the guys is looking into it.
I'll post here when it's back up.

[Declan Wynne]

http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/

The above website server has been down now for a few weeks. Does anyone know whats happening with it?.

[James Waltman]

The server is undergoing some changes.
I don't know the whole story yet.
It was an independent server for the Vehicle Research Institute at WWU. That may be changing and the files may end up on the Department's server. Like I said above, I'll post here when it's back up (in whatever form).

[kyno]

Waiting for the WWU server backing-up,maybe anyone else has or knows where to find a 600rr engine model? Thanks! http://fsae.com/groupee_common/emoticons/icon_rolleyes.gif

[James Waltman]

Alright,
The library has been moved.
The new location is:
http://www.wwufsae.com/Shared_FSAE_CAD_Library/

This is the new WWU team website. The bandwidth for this site costs money (the last server was free to the team). Download whatever you like but please keep that in mind.

About the engine models: I might have added more models than were there before. I'm pretty sure that I had permissions for all of these. There should be credit for where the model came from.

I've added several models that I dug up recently. Nothing too big – battery, air filters, some engine sensors, etc.

Please email me if you have any models you would like to share – I was really hoping this would have more models than it does now. I encourage you to donate if you have anything – especially if you've been asking for models from this library. Please reciprocate. Send me an email and we'll work it out.

[kyno]

Really thanks to every one who helps new teams like us with the share of these important files!!

[Tobbe]

Can .SLDPRT be open in Pro Engineer or CATIA?

If anyone with Solid Works can convert the Yamaha engine models to .IGS, I would be really glad.

Many thanks to the people involved with the server!!!

/Clear River Racing - Karlstad University Sweden

[Caspar]

Tobbe,

You will have a heap of trouble opening .SLDPRT in ProE...not sure about Catia.
But for ProE your best bet is to use wireframe Igs, and try salvage whatever it comes out as.
In my experience, ProE and SolidWorks don't communicate too well

[James Waltman]

I just added models of the Cane Creek Double Barrel.
Thanks to Pontus from Lund University.

http://www.wwufsae.com/Shared_FSAE_CAD_Library/Suspension/

Is anyone willing to convert the files to a generic file format?
I'd like to include those as well. I'd do it but I can't open these.

[James Waltman]

I updated the Cane Creek DB file with an igs version of the assembly.

I also uploaded an Ohlins ST44 model.

Thanks again to Pontus for both of those.

[INTRUDER]

Does anyone have a CB600 model in Solid?My team will use this motor! If somebody has sends me for email!!!!!!!!
valdir.batista@ibest.com.br

thank u

[Studdert]

hi,

Just wondering if anyone has a .IGES file for the aprilia R/S XV550?

Shoot me an email at: Scott.Studdert@studentmail.newcastle.edu.au

Thanks.

[lokuputha]

http://www.wwufsae.com/Shared_FSAE_CAD_Library/Suspension/



Thanks http://fsae.com/groupee_common/emoticons/icon_smile.gif

edit: oh...says future version when I try to open it...SW2008 format maybe?

[Spearchucker]

I'm looking for models of some other mountainbike shocks. Specifically Fox Vanillas, Manitou Metels, and Marzocchi Roco. Any help here?

[Spearchucker]

Nothing? I feel like there have to be some teams that have stepped outside the box for their shocks?

[RFR Wingman]

Hey out there... Question: what year is this? We're looking for 07-08 CAD model of the CBR600RR. If this isn't it, does any one know what the differences are???


Originally posted by ad:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by James Waltman:
I just uploaded a really great CBR600RR model.
http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/En...CBR600RR_from_OU.zip (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/CBR600RR_from_OU.zip)

Thanks to Superfast Matt McCoy and the University of Oklahoma for this.
http://dot.etec.wwu.edu/fsae/HostedPics/James/600rr_1.JPG

Awesome! Alot of people will enjoy this. Very generous of OU! </div></BLOCKQUOTE>

[James Waltman]

I've added a model of the Aprilia SXV550 from Cardiff.
http://www.wwufsae.com/Shared_FSAE_CAD_Library/Engine/Engine_Models/Aprilia/
The one difference with this model: Cardiff has asked that, if you use it, you place a sponsor sticker on your car. The zip file has a .jpg with the logo.

It's a big point cloud that bogs down my computer. Maybe some of you will have better luck with it.

Thanks to Dave Murray at Cardiff for contributing.

[SR910]

Does anyone have a 3D model of the Yamaha WR450F motor. I see a few requests for it on this thread. It would be greatly appreciated if someone could point me in the direction of one.

Thanks
Alex

UniSA FSAE

[Pennyman]

As a side note, I think it would be beneficial to have a place to upload useful excel spreadsheets too. Sometimes those can be even more valuable than CAD models IMO.

[James Waltman]

I can host Excel and pdf files in the same place as the CAD library.

I'd start off with it all in the same directory.
Brake spreadsheets go in the same place as brake CAD files.
If there is sufficient demand, I could eventually separate it out.

Start sending them and I'll put them up.

[rjwoods77]

James,

I sent some files for the Penske 8700 damper. Did you get them? I didnt get a response from you in the last couple of weeks.

Rob Woods

[James Waltman]

Yeah, I got them.
I just ended up very busy last week.

They're here:
ftp://www.wwufsae.com/Shared_FSAE_CAD_Library/Suspension/

Thanks for sharing.

[Rev Hard]

We urgently need CAD model and manual of Yamaha WR 450.
If anyone can help please mail me at dcemech89@gmail.com
http://fsae.com/groupee_common/emoticons/icon_rolleyes.gif

[mattson]

Looking for Solid Works model of 13" Panasport pro rally rims.

[P. Jayaraman]

Are the models for the Yamaha R6 motors still flawed in terms of mounting points, etc.?

And if they are, does anyone know where else we might find R6 engine models?

[Aman]

hello people,
i am unable to open the engine models f4i tried every model and if it opens im not able to get its dimensions. can anybody help. i also have solidworks edrawings 2009

[FryGuy]

Does anyone have a jongbloed 13x 6 wheel model?

[Red Mist Racing]

Hi all

We are in urgent need or a CAD model for an 07-08 Honda CBR 600RR. If anyone can help us out please email me at timtudor@hotmail.com.

Thanks
Tim

[Baz]

Under the brake caliper downloads, the wilwood dynapro single zip file actually contains the dynapro single floater model.

I cant seem to find just the dynapro single cad model.
Any help??
Thanks

[Captain Carisma]

Hi guys, i am in urgent need of a solidworks model for a 2006 yamaha r6 engine, can anyone help?

contact me at fustapower69@hotmail.com

Thanks

Chris

[cfaas416]

Anyone have a solidwork part for Wilwood DynaPro Calipers? if so please send my way cfaas416@gmail.com

[m.velidakis]

I am looking for a yamaha yz450 cad file...can anyone help me? i saw that is request of many teams. So if anyone can help it would be great!

Thank you in advance!

[Todd F]

Our team has a relatively accurate Yamaha accurate 99-02 Yamaha R6 Pro/E file that was a CAD class project.

I am looking for a 07-08 Honda CBR 600RR to polish up our CAD model, I'm tired of looking at the ugly block in the rear of our car.

Contact me at fins@eden.rutgers.edu

[Maverick]

does anybody has the rolling chassis,IGES cad file?there is no chassis in given link.please send me on mail id- praveen.gupta207@gmail.com

thanks & regards

[Tim.Wright]

Originally posted by Maverick:
does anybody has the rolling chassis,IGES cad file?there is no chassis in given link.please send me on mail id- praveen.gupta207@gmail.com

thanks & regards

Funniest post ever, was having a s*** day until I read that - cheers

Tim

[Gabri1972]

Hallo to all

Is possible to receive the point cloud file of this CBR600RR model?

I need to use this file for a study, and I need to try to make a beautifull 3D model from the cloud....but is necessary to have the cloud or the STL/ASCII/PLY/TXT file format.

Thanks in advance...and sorry for my bad english

Gabriele


Originally posted by RFR Wingman:
Hey out there... Question: what year is this? We're looking for 07-08 CAD model of the CBR600RR. If this isn't it, does any one know what the differences are???

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by ad:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by James Waltman:
I just uploaded a really great CBR600RR model.
http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/En...CBR600RR_from_OU.zip (http://dot.etec.wwu.edu/fsae/Shared_FSAE_CAD_Library/Engine/Engine_Models/Honda/CBR600RR_from_OU.zip)

Thanks to Superfast Matt McCoy and the University of Oklahoma for this.
http://dot.etec.wwu.edu/fsae/HostedPics/James/600rr_1.JPG

Awesome! Alot of people will enjoy this. Very generous of OU! </div></BLOCKQUOTE> </div></BLOCKQUOTE>

[marie planchard]

The FSAE category on www.3DContentCentral.com (http://www.3DContentCentral.com) contains bearings, controls, brakes, drive train, chassis, suspension, fans, powertrain, switches, wheel and other sub categories. You can download in SolidWorks and other file formats. We set these categories up for FSAE teams and appreciate your support.

Also, www.3DContentCentral.com (http://www.3DContentCentral.com) is a great place for other standard parts used in senior design projects.

For SolidWorks sponsorship this year, go to www.solidworks.com/fsae (http://www.solidworks.com/fsae) Marie

[James Waltman]

This Library ( http://www.wwufsae.com/Shared_FSAE_CAD_Library/ ) will start moving over to the www.3DContentCentral.com (http://www.3DContentCentral.com) site with help from Paul Vizzio at SolidWorks.

It’s a much better format and I don’t get that many submissions anymore. (I expected more from everyone – especially the teams that have asked for models.)

You’ll have to register and log in to get models but it’s pretty straight forward. I don’t see any other downsides.

Paul will be contacting anyone who has contributed to get permission before transferring anything.
You’ll still get credit.

When it’s all up and running I’ll unsticky this thread and put up a new one.

I’ll probably leave the current library in place for some time in case there are any issues.

Consider this an open comment period if anyone can think of any concerns.

[Chris Texas]

Does anyone have a CAD Model of the Tanner Does anyone have a CAD Model of the Tanner Shocks? I'm looking for specifically the Platinum 4s, but any of the Gen 2 or 3s would work. More than willing to exchange some info or drawings. Email is Clemens8807@gmail.com.

Thanks,


Chris Drew
UT Austin
FSAE 07' to present

[Taylor Oelke]

Does anyone have a 2006-07 R6 cad model? I believe the ones in the archive are from an earlier year. Thanks.

[RANeff]

What about an 08/09 Yamaha? I cant seem to find a newer model anywhere.

[ziPPo]

Hey all,
does anyone has a CAD-Model of a 2008 Yamaha R6 engine??

you would help us a lot...


thanks

[proracer42x]

Originally posted by Studdert:
hi,

Just wondering if anyone has a .IGES file for the aprilia R/S XV550?

Shoot me an email at: Scott.Studdert@studentmail.newcastle.edu.au

Thanks.
Studdert, the only thing I found besides the point cloud that is posted on this site is located at the following link:
http://sketchup.google.com/3dw...8095e6ec643c8168f9a7 (http://sketchup.google.com/3dwarehouse/details?mid=7075765549c88095e6ec643c8168f9a7)
This contains a Sketchup model of an 2008 Aprilia SXV 450 Engine.
proracer42x

[blueflame898]

Originally posted by RanE5-CSU:
What about an 08/09 Yamaha? I cant seem to find a newer model anywhere.

Anyone ever locate a CAD drawing of the newest R6 motor? I've been checking around and have yet to find one.

[ahilto3]

We just got our new motor for next year and i desperatly need a solidowrks 3d model of a 2007 gsxr600 motor. its holding us back by not having it so any help is appreciated

[thewoundedsoldier]

Digging this one up. Good ideas last.


Originally posted by Pennyman:
As a side note, I think it would be beneficial to have a place to upload useful excel spreadsheets too. Sometimes those can be even more valuable than CAD models IMO.

I just started this for my team:

www.engr.sjsu.edu/sae/formulahybrid/files (http://www.engr.sjsu.edu/sae/formulahybrid/files)

It is small and unorganized, but has some basic papers, PDFs, and excel sheets on different things. If you want to add something, just send it my way.

BTW - I found all these in simple searches so I am assuming the author(s) meant for them to be accessible. If you find something that you had a hand in and you don't want it up, let me know.

[Ben A]

I need the drawing of the BBS FSAE 13x7 and 13x7.5 Rim, Or direktly a CAD Modell as Step, Solidworks, Unigrafix NX .prt or IGES Format

Thanks

[Ben A]

nobody?

[Nick Renold]

I have models of the BBS 13x7 and 13x9. PM me your email address.

You will want to check the dimensions against your wheels, as I think they come in different offsets.

[Ken_D]

This may be a bit of a long shot, but does anyone have a model that's remotely accurate for an 09 R6 engine by chance?

Thanks

[AnthoniX]

Thank you,James.Could you add something about oiling,Especially those about dry sump oil system?Cheers.
Anthonio

[brunosan]

Hello everybody, we're trying to make a CAD of our engine, 2007 Honda Hornet 600 engine, but we're having some problems.
Doen anybody have that engine and its 3D model?

[Hub]

Below is a link to our 2008 Hornet engine scan. 2007 and 2008 engine are identical. Unfortunately the scan is very, very incomplete.
http://dl.free.fr/csrP1hU1L

If someone want the Point Cloud to make a better model and add it to the FSAE CAD FILE Library, just ask.

[efernandes]

Does anyone have the CAD for the newer (08-11) Yamaha R6 Engine? We are in desperate need for this engine.

[Big Pablo]

I know it has been asked zillion times, but I'm looking for a Suzuki Hayabusa or 1000cc engine CAD file. It would be very appreciated.
thanks.

[rmk36]

Does anyone have a model of the Drexler diff?

[buggaero]

I would like to request a drawing or 3D CAD file of Keizer kosmo series 13" x 7" wheels with 6" backspacing. What i basically seek is the value "A" , that is the PCD of the bolts.
I am going to get them in few days but that would be too late for our design n manufacture schedule.
Our payment for the wheels is stuck in transaction legalities.

[Abhilash Saksena]

http://www.wwufsae.com/Shared_FSAE_CAD_Library/

what files are these?? what software do these require to open??

[jshroyer]

Originally posted by rmk36:
Does anyone have a model of the Drexler diff?

To get the model you have to contact drexler about it. they make you sign a agreement that you wont send out the model but they will then give it to you.

[jshroyer]

Originally posted by buggaero:
I would like to request a drawing or 3D CAD file of Keizer kosmo series 13" x 7" wheels with 6" backspacing. What i basically seek is the value "A" , that is the PCD of the bolts.
I am going to get them in few days but that would be too late for our design n manufacture schedule.
Our payment for the wheels is stuck in transaction legalities.

could you please send that model to me then too.

[Phoenix Race Works]

Does anyone have a CAD model for the Aeromotive 13109 - Aeromotive A1000-6 Injected Bypass Regulator?

If so would you be willing to share it? I have lots of cad models I would be wiling to trade for it.

Thanks!

[Huskamp]

Does any one have a model of the 06-07 GSXR600 or the 08-09 GSXR600 engine? Any help would be fantastic!

[Mechie3]

Originally posted by Phoenix Race Works:
Does anyone have a CAD model for the Aeromotive 13109 - Aeromotive A1000-6 Injected Bypass Regulator?

If so would you be willing to share it? I have lots of cad models I would be wiling to trade for it.

Thanks!

Is this what you're looking for?

http://i139.photobucket.com/albums/q291/mechie3/SatMar27083936AmericaNew_York2010.jpg

[emd44]

I am looking for a decent helmet model. Just need the outer surface for aero analysis. We use G-Force Pro Eliminator #3023, so if someone has this one or a similar one it would be great! Willing to trade.

Thanks

Evan Dimmerling
Vice President
Drexel Racing

[BenjaminL]

Originally posted by rmk36:
Does anyone have a model of the Drexler diff?

Also looking for a cad model of the Drexler LSD. anyone?

[mech5496]

Just contact Drexler. They will ask you to sign an NDA agreement (which says you will not sell their design) and then they will give you a hell of a detailed CAD. http://fsae.com/groupee_common/emoticons/icon_wink.gif

[Ben A]

Hello does anyone would share your ISR Brake Caliper CAD Models? We are searching for the 22-048 A B or C and 22-049 Models Thank you!

[NaseerKhan]

Is there any way too convert a DXF format file into "part" file? please help.
NaseerKhan
Formula Pakistan

[kcapitano]

You should be able to import a .dxf file into your solid modelling program as a sketch. From there you will need to make the part 3D on your own, but you will have a start. Use the "help" function in your solid modelling program, or see if you modelling program has tutorials/videos online.

Oh, and you could always make the part yourself from looking at the .dxf...

[dlftlrahs]

Originally posted by fecoviruz:
Hello,

We really need your help here. Our team could really use the CBR600 f4i engine model. If you are so kind to help us, please email it to me at fecoviruz@yahoo.com.

Maybe Horace have few CAD models that he received previously.Could you send it to me.

Thanks a lot guys. I really appreciate it.

[John McCrory]

Pardon me if this has already been mentioned; I've not checked all 7 pages.
At our website www.aurorabearing.com, (http://www.aurorabearing.com,) we have 2 and 3D CAD drawings available for our catalog rod ends and spherical bearings. The nice thing is, rod ends are a fairly consistent product in terms of envelope, so drawings are not Aurora specific.

[SteveOr]

Hello,

i need a CAD Model of the Keizer 10" Wheels and the shells. My Problem with the Keizer CAD model is i have problems to import the iges into my Siemens NX8. Can anybody upload one of the 10inch rims as a STEP oder Parasolid or Solidworks model? The Keizer support is not so fast....

Her you can download the iges files http://www.keizerwheels.com/images/CL-10 Series.zip

Thank you

[Christian B.]

Hello from Germany,

our Team is looking for a CAD Model of the Yamaha R6 08- Engine. Would be very nice if someone send me an Email.

c.bartschies@greenlionracing.de


http://greenlionracing.de

[mmendes413]

Does Anyone have the ISR calipers? ISR's .net site has been down for 4 days which had a basic drawing on it. Their .se site doesn't says they don't have email? I find that hard to believe. If you have a model email it to csufsae@gmail.com we would really appreciate it!

[Phoenix Race Works]

Originally posted by Mechie3:
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Phoenix Race Works:
Does anyone have a CAD model for the Aeromotive 13109 - Aeromotive A1000-6 Injected Bypass Regulator?

YES, that is what I was looking for. However, we are now going to use a new regulator Aeromotive 13105. Does anyone have this model??

Thanks!

Is this what you're looking for?

http://i139.photobucket.com/albums/q291/mechie3/SatMar27083936AmericaNew_York2010.jpg </div></BLOCKQUOTE>

YES, that is what i was looking for. However, we are now going to use a new regualtor Aeromotive 13105. Does anyone have this model??

[Thibault HUGUET]

Does anyone have a catalog of fittings for braided hose like on the previous image ?
I search it for ou CAD model and make it one by one is very very long...
Thanks

[diablo_in_charge]

Please let me know what should be the capacity of fuel tank if we are using honda cbr 600f4i .
Thanx for your help in advance.

[PatClarke]

Apart from posting this question in the wrong thread Diablo from Bhopal, how big do you think the tank should be?

Pat

[diablo_in_charge]

Can anyone provide me the cad model of check valves & fuel rail of Honda CBR 600 f4i engine.
Any help regarding this would be greatly appreciated.

[Alex J.]

CAD library link from the first post is down for me. Anyone else?

[MKakli]

Originally posted by Alex J.:
CAD library link from the first post is down for me. Anyone else?

Yep, same for me....was working a week or two ago.

[MUsusp72]

Does anyone have the CAD file for this Wilwood caliper? Or anything similar.

Caliper (http://www.wilwood.com/Calipers/CaliperProd.aspx?itemno=120-9687)

[Alex J.]

If you just need a place-holder, the dimensional drawings for the Dynapro single are at the link you posted. It wouldn't take more than a few minutes and a couple of extrudes to create a mock-up.

[MUsusp72]

Yea thats what I ended up doing, at first glance i thought it would be a bit more complicated. But it was simple enough.

Thanks for the suggestion.

[Alex J.]

Anytime.

[MKakli]

Did anyone manage to scoop up the 07 CBR 600RR Model before the link went down? If you could, please send it my way at ec8540@wayne.edu

[fsZG]

i've had a hard time finding someone to scan it for me, so to spare you some time - both stl and igs of 2007 cbr600rr is avaliable at my grabcad account:

http://grabcad.com/library/200...nda-cbr600rr-1/files (http://grabcad.com/library/2007-honda-cbr600rr-1/files)

i can also upload sump stl if someone needs it

[Moody]

Looks like the current WWU team did a revamp of their site around April 8th of this year and (possibly unknowningly) moved/deleted the list that the OP (James) set up.

Anyone from WWU or know of someone from Western Washington who might be able to re-establish this for those interested?

[corvus]

Hi everyone. I'm locking for yamaha fz6 s2 engine cad files. Can anyone help me sending them to sostanza86@gmail.com?

[Alex J.]

Just a heads up, the first link in the original post is active (the one crossed-out). It doesn't have everything the newer link has, but anything helps.

[SomeOldGuy]

We here at WWU have finally gotten around to trying to get the issue with the Shared CAD Files Library working again, found out that it most likely got renamed. I will post more information as soon as I have it.

[SomeOldGuy]

It is now up and running with the second link posted in OP. Not everything seems to be there that used to be but we have someone working on it.

[MKakli]

Thank you!

Also thank you to fsZG for sharing that CAD.

[BenMueller]

Hi everyone - does anybody of you have a CAD of a Honda CRF 450 engine? It seems that our CAD-Model is not correct ...

Thanks Ben

[B.Santana]

Does Anyone have a CAD drawing of a 2012 CBR-600-RR Engine? preferably on SolidWorks Format. Any help would be appreciated.

Thanks in advance,
Bryan

[Subomi Omowa]

Good day , does anyone have a CAD drawing of the 2005 honda CBR 600 RR and 2006 honda CBR 600 f4i engine. Your help will be deeply appreciated
Thank you
Subomi

[Ahmad Rezq]

Hello My Friends
Does any one have a CAD Drawing of Honda CRF 450 :/

[slicktop]

Have any teams tried to use an xbox kinect camera to scan their engine? If so, how did it turn out? Can you post a picture of the results?
Seems as though the resolution is not that great, but would probably be "close enough".

https://www.youtube.com/watch?v=_cKb3oEM47E

[FormulaFTW]

I've been trying to find a CRF450R or 450X engine model for a while, anyone have one? I think it would make a good addition to the library quite a few teams use it

[StefStam]

Hello people, looking for an accurate model of a GSXR 600 engine to finish designing the engine bay of our car
TEIWM Racing