PDA

View Full Version : dry sump route


DavidG
10-01-2007, 06:12 AM
how do you guys route your oil inlet line to your internal pressure pump?
DavidG
10-01-2007, 06:12 AM
how do you guys route your oil inlet line to your internal pressure pump?
Michael Palaszynski
10-01-2007, 12:35 PM
we remove the impeller from the internal pressure pump. then block off the two pick ups with brass plugs.

the oil is comes in through the hole on the transmission side of the engine. (remove the brass plug)
VFR750R
10-01-2007, 03:20 PM
For utilizing stock pressure pump on YZF, pickup is flush with oil pan surface, so pickup is built into custom pan.
Dallas Blake
10-02-2007, 11:59 AM
we run an F4 and we machine a flat oil pan with a grove in it. We place a flat o-ring in the grove to seal to the stock pressure pump pick up. This seals the pressure side from the crankcase. We then run a -8 90degree fitting off of the bottom of the pan to our oil sump. I think there are some pictures on our website if you are interested.