3.3.5.5 Mechanically Attached Roll Hoop Bracing

[Knut]

Hello everybody,

i have a questions about the Rule 3.3.5.5 Mechanically Attached Roll Hoop Bracing.

Can anybody elaborate me the "capping arrangement"�?


One more ask.
We will use a welded steel Frame in consideration of the rules. Is it permissibly to separated the frames mechanically into the Mainframe(Roll Hoop and front Roll Hoop)and a rear Frame? Both parts will be connected with 10mm screws and a double-lug joint.

best regards

Knut

[JHarshbarger]

The capping arrangement is basically a piece of sheet steel that is welded across the top or bottom of each of the tabs holding the removeable bracing.

For the second question, you're going to want to ask the Rules Committee directly.