PDA

View Full Version : Complete Wilwood brake and hub set



oldfsae
02-15-2012, 04:06 PM
For sale is a complete brake and hub set from an old ill-fated FSAE team. Everything is new in box, never used. But everything is about 10 years old (it has been sitting in storage). $300 for everything shipped to your USA address.


Calipers:
2 Wilwood Dynalite Single Calipers
Part number: 120-4060

Rotors and hubs:
I'm not sure what brand/model these are. The rotors are 10" diameter x 3/8" thick (solid with 3 slots), which matches the specification for the calipers. The hubs are 4x100 with a 2.5" outside diameter hub. Everything is aluminum (the rotors are anodized black).

Bearings:
2 Timken tapered roller bearings, part number 15113
2 Federal-Mogul tapered roller bearings, part number L44643

There are also 2 seals and dust caps that read "Bishop Racing". Maybe the rotors and hubs are also Bishop Racing, but their web catalog appears to be down so I cannot verify.

To be clear, I didn't order this stuff originally, so I can't guarantee that it all fits together. I have to imagine it does, but buy at your own risk.

It looks like this is about $550-$600 worth of stuff new, so I'm asking $300 for everything (free shipping in USA). I'd like to sell it all together rather than part it out, so for a little more than the calipers cost alone, you'll get everything else you need. What a deal!

Let me know if you have any questions.

https://lh6.googleusercontent.com/-jRZ1XU81F-4/TzxHf5oeznI/AAAAAAAAAEk/71INTEfJtxI/s800/brakestuff.jpg

oldfsae
02-15-2012, 04:06 PM
For sale is a complete brake and hub set from an old ill-fated FSAE team. Everything is new in box, never used. But everything is about 10 years old (it has been sitting in storage). $300 for everything shipped to your USA address.


Calipers:
2 Wilwood Dynalite Single Calipers
Part number: 120-4060

Rotors and hubs:
I'm not sure what brand/model these are. The rotors are 10" diameter x 3/8" thick (solid with 3 slots), which matches the specification for the calipers. The hubs are 4x100 with a 2.5" outside diameter hub. Everything is aluminum (the rotors are anodized black).

Bearings:
2 Timken tapered roller bearings, part number 15113
2 Federal-Mogul tapered roller bearings, part number L44643

There are also 2 seals and dust caps that read "Bishop Racing". Maybe the rotors and hubs are also Bishop Racing, but their web catalog appears to be down so I cannot verify.

To be clear, I didn't order this stuff originally, so I can't guarantee that it all fits together. I have to imagine it does, but buy at your own risk.

It looks like this is about $550-$600 worth of stuff new, so I'm asking $300 for everything (free shipping in USA). I'd like to sell it all together rather than part it out, so for a little more than the calipers cost alone, you'll get everything else you need. What a deal!

Let me know if you have any questions.

https://lh6.googleusercontent.com/-jRZ1XU81F-4/TzxHf5oeznI/AAAAAAAAAEk/71INTEfJtxI/s800/brakestuff.jpg

SpeedyToad
07-16-2012, 05:17 PM
Hey-
I know your post said you'd like to sell all the parts together, but I'm interested in just the calipers for a retired car rebuild project I'm working on up in MN. We are on a very tight (ie non-existant budget) and have a few parts that were lost or trashed over the years for whatever reason. What could you let them go for?

Thanks,
Todd

Lax
10-13-2012, 11:19 AM
Is this still for sale?