A-Arm Frame Mounts

[drivetrainUW-Platt]

We will probably be running the same sphereical rod ends we have been, with a 3/8" hole, and are trying to come up with a good way to mount them to our frame, all the points will be nodes of a least 4 1" tubes. latst year we used 1" square and notched it for the frame but also had to for the rod ends, lot of labor and didnt turn out ideal.
Thanks,

[drivetrainUW-Platt]

We will probably be running the same sphereical rod ends we have been, with a 3/8" hole, and are trying to come up with a good way to mount them to our frame, all the points will be nodes of a least 4 1" tubes. latst year we used 1" square and notched it for the frame but also had to for the rod ends, lot of labor and didnt turn out ideal.
Thanks,

[fade]

2 part epoxy