Brembo P34G Caliper Drawing

[scott_rfr]

Does anyone have a technical drawing or CAD drawing of a P34G caliper? I have searched this site, 3d Content Central, etc with no luck. Any help would be greatly appreciated.

Thank you,
Scott
Rutgers SAE

[scott_rfr]

Does anyone have a technical drawing or CAD drawing of a P34G caliper? I have searched this site, 3d Content Central, etc with no luck. Any help would be greatly appreciated.

Thank you,
Scott
Rutgers SAE

[D Collins Jr]

Hi Scott,

Be careful posting that kind of request here...there's no telling what kind of a frenzy you'll send Grant into!!!

Have you tried looking at the catalog on Brembo's site? I think that this (http://www.brembo.com/CatalogoRacingMoto/2008/index.html) might be what you're looking for.

[scott_rfr]

As I was posting I was wondering what the response was going to be. At least it was not a "I urgently need caliper, please email now!".

Back OT, that link only provides technical drawings for their competition calipers. There there is no drawing for the P34G. Maybe I am loosing my mind, but I dont see it.

Scott
Rutgers SAE

[D Collins Jr]

Darn. I was afraid of that. Hopefully someone can help you out. Are you switching to the P34 this year?

[scott_rfr]

Looking into it. Seems like they will fit our application better.

Scott
Rutgers SAE

[Pico]

Hello

Here's a file that has the drawing of the P32 caliper but the external dimensions are the same for the p34. There's also a shabby solidworks model that I would check for exactness with the drawing.

P32 caliper model (http://www.wwufsae.com/Shared_FSAE_CAD_Library/Brakes/Calipers/Brembo/)

[mpatton]

You can try using one of the drawings from this catalog (http://kvickmc.se/brembo-mckatalog/calipers/). It doesn't look like they specifically have the P34G but you should be able to grab most of the dimensions off the P32G. They also have a P34C, not sure what's different with that one.

[Grant Mahler]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by D Collins Jr:
Hi Scott,

Be careful posting that kind of request here...there's no telling what kind of a frenzy you'll send Grant into!!!

Have you tried looking at the catalog on Brembo's site? I think that this (http://www.brembo.com/CatalogoRacingMoto/2008/index.html) might be what you're looking for. </div></BLOCKQUOTE>

Haha - yep, that's me. But it appears the OP did actually look at the CAD library, and checked a few other sites. And he asked in full sentences, in English. All good things in my book. I'll try and get off my high horse about crappy forum members.

[strembl3]

Hey,

Is there anyway someone can save me the solidworks model as a .iges file?

Thanks!!