Tripod CV Joint

[ed84c]

Evening Chaps,

We've just be installing our new diff. only to find that the tripod bearing has been destroyed.

Obviously this is a pretty major problem, does anybody have one (or 4) that we could buy?


The specs are:
20 splines (21/20mm)
OD of each bearing 1"

Any help would be very much appreciated

All the best
Ed
---

[ed84c]

These are the bad boys we are after I believe:

http://www.taylor-race.com/part.cfm?id=71&popup=1

We are off to FSG in a few days, so as a last resort we could pick one up off a team there? But obviously we have some days testing planned which we wouldn't be able to meet in that scenario.
Thanks again
---

[Dunk Mckay]

Any juice yet?

If those are GKN made parts you might try the guys at Brunel Racing, either message them on their facebook page or I can possibly put you in touch. I'm not going to be around until after Germany, but know they have two spares, and I don't imagine they'll need both of them (not without having other major problems as well), and I'll probably be running the drivetrain next year so it'll be my problem if they're needed in future. We've had them a while so I'm not sure what model/dimensions they are, but it's worth getting them to check.

[ed84c]

Thanks Dunk, all sorted now thanks to Herts

[scotty young Taylor Race]

Ed.

Did you find any.?..... Sorry for the delay .
Anything I can do here to help ya..