Fuel Line Question

[aZthing]

Well, I am trying to put together a fuel system for our recently aquired F4i engine. I've been looking at a Walbro GSL393 external fuel pump, but am having trouble finding a suitable fuel line and fittings to connect it to the engine. Does anyone have any suggestions?
Thanks for your help,
Mark

[Marc Jaxa-Rozen]

We chose an '87 2.3L Ranger pump, it's easily available (NFPP74028 at Napa) and was recommended by Brian Lewis from PE for an FSAE application. Swap the barbed outlet fitting for a M8/AN adapter then just replace the banjo sealing nut on the fuel rail with an appropriate fitting (M12 thread IIRC).

Marc
École Nationale d'Aérotechnique

[Charlie]

You can equip the Walbro external pumps with a barbed inlet and an AN6 outlet. Any type of braided line with AN fittings will work from there.