Aluminium Sandwich Panel

[winnie]

Expressions of interest:
I have several alu skinned alu honeycomb cored panels of varying thickness and sheet sizes.
The material is stored in Melbourne Australia and if i was to sell shipping would be the responsibility of the buyer.
This particular material was to be used as flooring in different aircraft, is still in it's protective plastic film and well looked after.

[winnie]

Expressions of interest:
I have several alu skinned alu honeycomb cored panels of varying thickness and sheet sizes.
The material is stored in Melbourne Australia and if i was to sell shipping would be the responsibility of the buyer.
This particular material was to be used as flooring in different aircraft, is still in it's protective plastic film and well looked after.

[Jarrod]

any more details on sizes, thicknesses, qunatities?

[Craig.]

If Jarrod is not interested, we may be.I'd also like to know those details. I'm guessing it could be for a similar purpose http://fsae.com/groupee_common/emoticons/icon_razz.gif

Craig Lewis
MURMotorsports

[winnie]

I will get all the details and post them up.
I have a fair bit of the stuff and am hoping to use some myself with the sale of the balance to fund the project.
The cost i'm asking is greatly reduced (advanced composites valued the entire stock at over $65k 18 months ago)
From memory: the skins are pretty thin ~0.8mm ?? i will check
several sheets 3600 x 1220 x 10mm
a few 2400 x 1200 x 12.7mm
an odd piece 1200 x 1200 x 30mm
but i will get all the details and post them up.
Cheers

[winnie]

Ok details as promised:
I had confused a couple in my previous post.
ALL PANELS HAVE SKIN THICKNESS ~0.8mm, and prices are AUD$

1220 X 3660 X 20 x3off @ $1000 ea
1220 x 2540 x 12.7 x5off @ $700 ea
1220 x 1220 x 19 x1off @ $350
1220 x 1830 x 19 x2off @ $500 ea
1220 x 2540 x 10 x14off @ $700 ea
1220 x 2450 x 25 x1off @ $750

I can be contacted at awinbanks@hotmail.com

[winnie]

Prices negotiable, but be polite as they are already approx. 75% off retail.

[winnie]

Bump.
C'mon people, no interest??

[winnie]

C'mon, at these prices you can get the stuff just to toy around with to become proficient. Who wants the worlds lightest coffee table??

[bossdx422]

I am interested. What is the 1off or 2off stand for though

[winnie]

1 x off = means i have one sheet
2 x off = i have 2 sheets
the off thing (as opposed to 'of') comes from "off the rack", "off the shelf" like in eng. drawings with the details an item stating 2 off required....

[Leptos]

hey, a bit of a late reply, u still got some Aluminium panels? Prefer those 19mm thick ones.

In the next month we are going to have to source some.

http://fsae.com/groupee_common/emoticons/icon_smile.gif

[Big D]

hey, if you're looking for the 1" variety, we (U of S) can also hook you up.
Check here (http://fsae.com/eve/forums?a=tpc&s=763607348&f=412600868&m=44110230511&r=48510793321#48510793321) here for more information

[winnie]

yes have the 19mm stuff, are in OZ??

[Leptos]

Yeh we are in oz, university of melb. Still doing some final calcs to check skin and core thickness, then on to manufacture.

What is the material left from?

[winnie]

The material was originally intended for aircraft flooring. A company that repaired commercial aircraft went belly up, a recycling company bougth all their metal stock (they paid scrap aluminium prices for the stuff ~$2.00 a kg at the time!! Thieves) and i bought it from them.
Some is ear marked for my own projects, the rest is for sale to fund said projects http://fsae.com/groupee_common/emoticons/icon_smile.gif.

[Nero]

There is of course Ayres panels in Western Australia, who make panels from 5052 skins.