Honda CBR 600 RR Mechanical Water Pump Testing

[FSAE-Engine]

Hi people,

Does any of you have any suggestion for testing out the stock mechanical water pump flow rate on the cbr 600 rr ?

Thank you

[Menisk]

Attach a hose to one side and stick it in a bucket with a known quantity of water, time how long it takes to empty the bucket?

[OspreysGoSWOOP]

FYI the stock pump is connected to the drive shaft so it's proportional to the RPM.

[Menisk]

1. Set limiter to whatever RPM
2. Mash throttle pedal
3. Jam hose in bucket

Repeat for pretty graph.

[Drew Price]

Originally posted by Menisk:
1. Set limiter to whatever RPM
2. Mash throttle pedal
3. Jam hose in bucket
4. Profit!!!

Repeat for pretty graph.



Fixed.

[Rex Chan]

Just thought I'd spam once again - we tested and found the flowrate for a Honda CBR600RR (03-06) stock mechanical water pump. Data and plots are here: Honda CBR600RR water pump flow rate test results (http://www.facebook.com/media/set/?set=a.10150813204983036.409754.559588035&type=3)

For reference, the Davies Craig EWP115 flows around 30L/min (through the block and radiator and hoses) at 12V and uses round 8.5A while doing so.

[sidneyhburns]

suggestion for testing out the stock mechanical water pump flow rate on the cbr 600 rr

The best way to find the flow rate is to buy a flow meter from McMaster and hook it up inline with the stock cooling system in place.

[Carrington]

The best way to find the flow rate is to buy a flow meter from McMaster and hook it up inline with the stock cooling system in place.

Ha ha. This spam bot actually makes a valid point. Adding restrictions reduces flow, and the two different water pumps may have much different responses to this. Especially an electric pump.