FSAE.com Forums    FSAE.com Forums  Hop To Forum Categories  For Sale    13x6 Monocoque wheels
Go
New
Find
Notify
Tools
Reply
  
13x6 Monocoque wheels Login/Join
 
Member
posted
We have an old set of 4 13x6 Monocoque wheels we're looking to sell. They have a 4 bolt pattern with a 100mm BC, and are around 8 lb each. We're looking for $125 plus shipping. I'm not sure of the offset, I haven't looked at them that closely and we don't have a datasheet anymore. They're in good condition, just a bit dull and scratched, but should polish up fine.

Let me know if you want pics or any more info.

Al
 
Posts: 42 | Registered: November 08, 2004Reply With QuoteReport This Post
New Member
posted Hide Post
PM sent
 
Posts: 1 | Location: Lubbock, TX | Registered: January 27, 2005Reply With QuoteReport This Post
Member
Picture of The guru of guru's
posted Hide Post
post some pics please


Ive gone to look for myself, if i get back before i return, keep me here.

 
Posts: 82 | Location: Geelong, Vic, Australia | Registered: January 27, 2004Reply With QuoteReport This Post
Member
posted Hide Post
I'll try to get some pics up tomorrow. Hopefully I can get into the race trailer, its covered in snow......

Sorry for the wait to those who PM'd me, I didn't have automatic notification turned on so i didn't know I had messages.
 
Posts: 42 | Registered: November 08, 2004Reply With QuoteReport This Post
Member
posted Hide Post
I am interested in your wheels if you still have them. Please respond here or email me at bh_741@cox.net .

Thanks
 
Posts: 20 | Registered: June 07, 2004Reply With QuoteReport This Post
Member
posted Hide Post
PM sent


B. Bell
UNH Precision Racing
www.unh.edu/fsae
 
Posts: 99 | Registered: September 26, 2005Reply With QuoteReport This Post
New Member
posted Hide Post
PM sent
 
Posts: 1 | Registered: November 14, 2005Reply With QuoteReport This Post
Member
posted Hide Post
Still available?
 
Posts: 28 | Registered: March 24, 2006Reply With QuoteReport This Post
Member
posted Hide Post
send me pic`s please

cheers


Albertodsa
F-SAE Unimet Motorsports
Caracas, Venezuela

"Your race car should be easier and more pleasant to drive than your street car. If it isn't, someone is doing something wrong"

Carrol Smith
 
Posts: 9 | Location: CARACAS VENEZUELA | Registered: November 23, 2006Reply With QuoteReport This Post
Member
posted Hide Post
Pics to eolsen6@gmail.com please. Thank you.


Erik O.
Ferris State University
 
Posts: 6 | Location: In the Lab | Registered: October 18, 2006Reply With QuoteReport This Post
Member
posted Hide Post
let me know if they are still available

cyber_x_ace@hotmail.com


Hiren G Patel

FS – Orion Combustion (Founder Member)
-------Prototype '06
-------Powertrain Lead '06 '07 '08 '09
-------Composites guy '10
-------Technical Director '10
-------Technial Advisor/Mentor '12

FS – Orion Electric (Founder Member) - Prototype '10

Driver/test mule '06 '07 '08 '09 '10 '11 '12

Orion Racing India
www.orion-racing.com
 
Posts: 103 | Location: Dyno lab | Registered: September 26, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 

    FSAE.com Forums    FSAE.com Forums  Hop To Forum Categories  For Sale    13x6 Monocoque wheels

© FSAE.com 2001-2011